FabFilter - Total Bundle v2025.05.21 VST, VST3, AAX, AU, CLAP WIN.OSX х64

Total Bundle is a set of all FabFilter plugins. In this bundle you get our professional EQ, reverb, compressor, multiband dynamics, limiter, de-esser and gate/expander, creative multiband distortion, delay, filters and synth plugins.

Pro-Q 4 – High-quality equalizer Pro-Q 4 – is one of the most complete equalizer plugins for mixing and mastering, setting a new standard for mixing and mastering. With improved sound quality and an easy-to-use interface, Pro-Q 4 combines precision and creativity. A particular highlight is the Spectral Dynamics mode, which targets problematic frequencies without affecting the entire frequency range. Other features include linear phase modes, flexible mid / side editing, Dolby Atmos support and an innovative Sketch EQ for intuitively drawing filter curves. Pro-R 2 – High-quality reverb module Pro-R is a high-quality algorithmic reverb that creates enough density for realistic sound, but does not overwhelm the mix and provides sufficient transparency. The user interface is clearly structured and allows you to intuitively achieve the desired effect. The unique decay rate equalizer allows you to adjust the reverb duration depending on the frequency. There is also a post-EQ for adjusting the frequency response of the output signal. Pro-L 2 – Multifunctional true peak limiter module With Pro-L 2, you get a professional limiter that simultaneously ensures loudness and transparency of the sound. The plug-in features high-precision output signals and level meters that are essential for professional applications. The K-System is also supported. With phase resampling, advanced smoothing and noise shaping, adjustable advance, attack, attenuation and linking settings, Pro-L is a complete solution for mixing and mastering tasks. Pro-C 2 – Professional compression plug-in Pro-C 2 is a high-quality compressor module with three different software-dependent compression types. Pro-C 2 impresses not only with its sound quality, but also with its innovative interface, which makes working with this compressor very easy. In Expert mode, the plug-in provides flexible signal routing with freely configurable side chain and channel coupling. In addition to input and output level meters, the Pro-C 2 features a knee display and an animated compression display that provides a comprehensive visualization of the editing process. Pro-MB – Professional Multi-Band Compressor and Expander

Pro-MB provides an intuitive approach to multi-band dynamic editing. Instead of traditionally splitting bands using transitions, Pro-MB allows you to create new bands directly in the desired frequency range. The interactive multi-band display clearly shows that the rest of the frequency spectrum remains untouched. Pro-MB has a unique dynamic phase processing mode. It basically has the same frequency response as a conventional multi-band processor, but without the often occurring delays or distortions. Only minimal phase changes occur when changing the gain. Alternatively, linear phase and minimum phase modes are available.

Pro DS – Intelligent De-Esser Even with the best microphones, preamps and converters, hissing sounds in vocal recordings cannot be avoided, which then occur during further processing with compressors, etc. Even more come to the fore. Thanks to the “single vocal” recognition algorithm, Pro-DS can accurately identify and specifically muffle hissing sounds. In “Allround” mode, the Pro-DS is an excellent tool for editing high frequencies in complex materials such as drum kits or even complete mixes. Despite its complex application possibilities, the Pro-DS is very easy to use thanks to its well-designed interface. Additional features include a preview function with a duration of up to 15 ms, adjustable stereo linking and additional processing “only in the middle” or “only on the sides”. Pro-G – Flexible gate/expander plug-in Pro-G features carefully balanced algorithms, full control over the side chain and channel coupling, excellent metering and a clear display. In addition to the excellent sound, the plug-in impresses with its flexibility of customization. The user can choose between processing in mono, stereo and MS mode, and in expert mode the side chain inputs can be fully configured according to his own requirements. Saturn 2 – Plug-in for multi-band distortion/saturation The Saturn 2 is a multi-band distortion that covers a wide range of distortion effects. From subtle saturation that mimics the feel of a tube or tape machine to the intense distortion of a guitar amp, the Saturn’s big selling point is its six ranges, each of which lets you adjust feedback, dynamics, tone, and modulation parameters separately. With XLFOS, envelopes, envelope amps, and MIDI controllers, the Saturn has virtually endless modulation possibilities that are easy to create with drag and drop. Timeless 3 – Vintage Tape Delay Plugin

Timeless 3 not only simulates classic tape echo at the highest level, but also makes a great sounding tool for the sound engineer thanks to its creative possibilities. With this plug-in you can create echo, but also chorus, flanger, phaser, even scratch effects and much more. The delay signal is passed through two high-quality multimode filters (from Volcano 2) and then fed back to the delay channels using adjustable feedback and crosstalk controls. Each channel can be phase inverted.

Volcano 3 – Powerful Filter Plug-in Volcano 3 is a filter plug-in that has a distinctly analog sound. Despite the wide range of functions, its operation is extremely simple and straightforward thanks to the “what you use is what you see” concept. In Volcano 3, up to four multimode filters can be used simultaneously. In addition to the distinction between low, high, band, formant, etc., the slope and sound characteristics can also be freely selected. The four filters can be controlled in different modes and feature pan and delay settings. Twin 3 – Powerful Synthesizer Plug-in Twin 3 is a sophisticated emulation of an analog synthesizer, although no specific model is modeled. Rather, Twin 3 focuses on creating powerful oscillators and flexible filter options. The oscillator signal is passed through two high-quality multimode filters (from Volcano 2), which are extremely versatile and allow free combinations of modes, slopes and characteristics. The oscillators can drive the filters in series or parallel. For improved sound, a delay section with its own filters is provided. One – Simple Synthesizer Plug-in One is a very simple synthesizer plug-in. It has only one, but very powerful oscillator, which generates typical analog basic waveforms and pulse width modulation. The low-pass filter is modulated by an envelope and a syncable low-pass filter. One is a simple synth for bass lines, leads and simple pads. The focus is on a rounded sound. Simplon – Basic Filter Plugin Simplon is a simplified version of Volcano 2. It features two independent filters, each of which can be used as a low-pass, band-pass or high-pass filter with three different slopes. Both filters can be connected in series or parallel. The filters have an analog sound character and can reproduce self-oscillations. Thanks to three different characteristics, the basic sound can vary from soft to aggressive. Combined filter settings allow you to use 27 different filter types. Micro – Mini Filter Plugin

Micro is a very simple filtering plugin. It uses the algorithm and sound of the Fabfilter One synthesizer. The round, soft sound can be transformed into a rough and aggressive one thanks to self-oscillation and high gain. The filter can be switched between low and high frequency modes and, in addition to manual adjustment, can also be modulated using an envelope follower depending on the input material.

May 21, 2025

We’ve updated FabFilter One, Simplon, and Micro
with a new design and a few small improvements:

New modern look
Added UI scalability
Support for Pro Tools hardware surfaces
Bypass for Micro and Simplon

WIN

FabFilter Micro v1.3.0 – Update
FabFilter One v3.5.0 – Update
FabFilter Pro-C 2 v2.2.0
FabFilter Pro-DS v1.2.4
FabFilter Pro-G v1.3.4
FabFilter Pro-L 2 v2.2.4
FabFilter Pro-MB v1.3.1
FabFilter Pro-Q 4 v4.0.2
FabFilter Pro-R 2 v2.0.4
FabFilter Saturn v2.1.1
FabFilter Simplon v1.4.0 – Update
FabFilter Timeless v3.0.8
FabFilter Twin v3.0.5
FabFilter Volcano v3.0.7
(optional) legacy versions for compatibility with older projects
FabFilter Pro-C v1.2.3
FabFilter Pro-L v1.3.5
FabFilter Pro-Q v1.2.3
FabFilter Pro-Q 2 v2.2.8
FabFilter Pro-Q 3 v3.2.7
FabFilter Pro-R v1.1.8
FabFilter Saturn v1.2.9
FabFilter Timeless 2 v2.3.9
FabFilter Twin 2 v2.3.9
FabFilter Volcano 2 v2.3.9